SimulationExams.com Practice Test Engine Update

Pin It

The test engine for practice tests, offered by SimulationExams.com, has been updated to include more user friendly features. The update enables a user to maximize the display for bigger monitors dynamically, resulting in better user experience while taking a test.

Check out some of the tests here: A+ Essentials, CCNA Exam Simulator, CCNET Exam Sim

Security+ Practice Tests Revised!

Pin It

Practice tests for Comptia Security+ practice tests have been revised. The new tests conform to the latest exam objectives, SY0-301. Visit the website for more details.

Product page: http://www.simulationexams.com/exam-details/security-plus.htm

The exam objectives covered by the certification include Network security, Compliance and operational security, Threats and vulnerabilities, Application, data and host security, Access control and identity management, and Cryptography.

The practice tests offered by SimulationExams.com have 300+ questions with Flash cards, and Exam Cram. The tests may be downloaded at http://www.simulationexams.com/downloads/comptia/security+download.htm

The new objectives replace the older SY0-201, and the older tests are getting retired by December 2011.

CertExams.com CCNA Network Simulator

Pin It

We have recently released a revised version of Cisco CCNA NetSim. CertExams.com CCNA Network Simulator provides a simulated network environment for hands-on practice using virtual routers and switches. The recent revision includes support for Do command, and some debug commands. The “do” command allows running a privileged level command from configuration modes such as interface and global.
The advantages of using CCNA network simulator include the following:

– Lab exercises for hands-on practice.
– Router and switch simulator.
– Simulate Cisco® IOS routers (805, 806, 17xx series, 25xx series, 26xx series, and 36xx series) or switches ( 19xx, 29xx ).
– Connectors available are Serial, Ethernet, IsdnBri, Frame Relay, Fast Ethernet.
– Extensive Lab Manual is provided.
– Support for 300+ router and switch commands.
– Network designer that provides drag and drop feature for inserting devices and connectors. GUI based device configurator.

You can type short form commands in IOS simulator for router/switch commands just like in actual router/switch.

About CCNA Certification:
CCNA Certification is awarded by Cisco Systems on successful completion of qualifying exam(s). CCNA is intended for candidates who have just started working on Cisco ruoters and switches.
The exam objectives covered by CCNA certification include the following:

1. Describe how a network works
2. Configure, verify and troubleshoot a switch with VLANs and interswitch communications
3. Implement an IP addressing scheme and IP Services to meet network requirements in a medium-size Enterprise branch office network.
4. Configure, verify, and troubleshoot basic router operation and routing on Cisco devices
5. Explain and select the appropriate administrative tasks required for a WLAN
6. Identify security threats to a network and describe general methods to mitigate those threats
7. Implement, verify, and troubleshoot NAT and ACLs in a medium-size Enterprise branch office network.
8. Implement and verify WAN links
Other products offered by CertExams.com include the following:

1. CCNA Exam Simulator: The only practice exam that provides complete range of CCNA question types including simlets and simulations.
2. Juniper Junos Simulator for JNCIA

Checkout available labs here: https://routersimulator.certexams.com/router-labs/index.html

Checkout available router/switch commands here: https://routersimulator.certexams.com/commands.html

Note: These will be updated from time to time.

Juniper Junos NetSim Revised!

Pin It

CertExams.com has recently updated Juniper JUNOS Network Simulator. Several new features have been added that include the following:

Support for Juniper Swiches – For the first time, Juniper switches have been added to the netsim. Now on, users will be able to configure routers as well as switches using the software. It is now possible to design a Juniper network using routers as well as switches.

Lab Exercises – Several Lab Exercises have been added to include Juniper switches and routers. This provides good hands-on practice for beginners.

New Commands – New commands included for switches and routers. Switch commands for VLANs, VTPs, and others added.

Please view the product page on Juniper JUNOS Network Simulator

You can download the Juniper JUNOS Simulator

 

TutorialsWeb.com has been revised to include new articles.

Pin It

The website TutorialsWeb has been updated thoroughly. The new features include the following:

1. Top navigation with a drop down menu. The top menu is divided into 5 major categories. These include Electronic SMT Assembly, Satellite Phone Communications, Computers and Wireless Networking, RF Test and Measurement, and Software. Users will be able to browse through different categories and view the tutorials available.

2. Tools menu: The home page consists of a list of free tools available. These include a, satellite link budget calculator, b, satellite look angle calculator, c, RF tools and calculators.

3. Featured articles: The home page has a featured articles section. These include Surface Mount Assembly and Rework, and Computer Printers and Scanners – A Review.

4. New articles: The home page displays new articles that have recently been added to the website in the New articles section. IP v6 Tutorials, Microsoft VB.NET – Drag-n-Drop Program, and Satellite phones tutorial have been added recently.

The website uses Cascading Style Sheets (CSS) extensively. It has also been checked for compliance with major Internet browsers including Internet Explorer, Mozilla FireFox, Opera, and Google Chrome.

Additionally, each article has been laid out such that the navigation within the article is easy. Path to each page of the website with respect to the Home page has been given so that users landing on any page will immediately know the location of the page with respect to the rest of the website.

The articles that are currently available on the website include Surface Mount Technology (SMT) and Components, Reliability Engineering, Satellite Communications, Satellite Link Budgeting, Computer Networking, .NET development, and others.

More new articles are included from time to time. Please visit Tutorialsweb.com and leave your comments.

CCNA Exam Notes

Pin It

CertExams.com released cram notes for Cisco CCNA. The cheat sheets consists of about 20 pages covering the following topics:

  • OSI (short for Open Systems Interface) and TCP/IP
  • Cisco IOS Fundamentals
  • IPv4 Addressing
  • Subnetting, Supernetting, and Variable Length Subnet Masks (VLSM)
  • Routing Protocols IGRP, EIGRP, RIP 1, 2, ng; BGP, OSPF, and others
  • Routed Protocols: IP, IPX, AppleTalk, etc.
  • Frame Relay
  • Access-Lists: Standard, Extended, and Named
  • Different Types of Network Address Translaions (NAT)
  • Router/Switch Configuration Commands
  • IPv6 Addressing
  • Switching: VLANs and VTP
  • Switching: Spanning Tree Protocol (STP)
  • Router/Switch Troubleshooting Commands, and others.

The notes is prepared to help the candidates to serve as a last minute preparation tool. Feedback may be emailed to webmaster at certexams.com

The cram notes is also suitable for candidates preparing for CCENT (Short for Cisco Certified Entry Network Technician), and ICND2 (Interconntecting Cisco Network Devices).

Checkout Cisco CCNA Cheat Sheets home page.

Other cram notes available include CompTIA A+,  Network+, and Security+.

 

Switch Simulator Released

Pin It

CertExams.com, recently released switch network simulator that supports Cisco switch IOS commands.

This software has been developed to help candidates preparing for any Cisco switching exam to get familiarized with the switch commands and labs in order to have hands-on-practice.

Features include

  1. Switch console simulator
  2. 100+ switch commands supported
  3. Support to short form commands
  4. Lab Exercises with detailed lab manual
  5. Detailed help files

The demo version of the software is limited with respect to fewer commands and labs. Once the full version is activated, the candidate can access complete list of labs and commands, and hence practice the same.

The software is compatible with Windows 2000/XP/Vista and Windows 7 operating systems.

Product and Download Links

More information on this product is available at the below link
http://routersimulator.certexams.com/switch-simulator.html

Download the switch simulator by visiting the link provided below
https://routersimulator.certexams.com/switch-simulator-download.html