CertExams.com, a leading netsim software developer, released Juniper Network Simulator with Designer after a thorough review. The new version of the software includes several updates to its command support, and the lab exercises. The new features include Host to router/switch communication and/or router/switch to host communication and troubleshooting. Additionally, it supports DHCP configuration on routers and enables DHCP info to be obtained by the hosts connected via Juniper router/switch network.
You may download the software from the website here:
Disclaimer: Juniper JNCIA(R) is a registered trademark of Juniper Systems (R) and is duly acknowledged. Anand Software and Training or CertExams.com are not associated with Juniper Systems or any other company.
CertExams.com, a leading NetSim and LabSim provider, recently updated it’s A+ Lab Simulator. The recent update includes several new labs as well as bug fixes. The details are the update are as given below:
Net Features:
Labs illustrating Windows 7 control panel features
Labs showing setting up remote desktop, etc.
Labs on creating/editing/deleting users/user groups and changing premissions.
Bug Fixes:
Labs 1 and 2 have been corrected to show proper connectors
CertExams.com recently updated its Network+ LabSim to include a couple of more features. The entire lab manual has been updated. The new update provides a progress bar that indicates, in real time, whether you are doing the lab exercise in the right way. A progress bar always compares your configuration commands with the answer file and provides instant feedback, should you go wrong.
This feature is particularly useful when a user is configuring complex labs (multiple device configurations) as he would get a feedback on his configuration at intermediate steps instead of waiting till the entire lab exercise is completed.
Another feature that had been implemented is the ability to remember the most recent lab that a user had completed, and commence from where he had left when the user logs in next time. In other words, a user will be prompted whether to start afresh or continue from the previous lab exercise. This is a good feature update as the lab manual contains dozens of exercises and it is difficult to complete the manual in a single sitting.
Lastly, a few of the mistakes in the lab manual had been fixed.
Please download the Network+ lab simulator. The demo version is free, and the full version is priced very effordably.
CertExams.com has updated its Juniper JUNOS network simulator to support Graphical User Interface (GUI) based configuration similar to that of Juniper JWEB. The new software enables a user to configure Juniper networking devices such as a router or a swithc by using graphical interface. The advantage associated with graphical input is that a user doesn’t have to remember several CLI commands as in the case of CLI based configurations. It may be noted that the CLI command line interface still remains and quite useful in learning device configurations by networking professionals.
We have added DHCP server functionality so that a router or a switch may be configured to work as DHCP server.
It is only software that is available for use in virtual networking environment and doesn’t any other software for working.
Other related software that one may be interested in trying is Juniper JNCIA exam simulator. This is useful for candidates appearing for Juniper JNCIA certification.
CertExams.com is an associate website of Anand Software and Training Pvt. Ltd., a Bangalore based company involved in the development of desktop and mobile apps.
Disclaimer: CertExams.com is not associated with Juniper Systems or any other company.
CertExams.com CCNA Netsim has been updated to simulate Cisco Configuration Professional (CCP) Graphical User Interface (GUI). The advantage of using CCP is that a user may configure a router or a switch by using graphical interface. A screenshot of the same is given below:
A GUI quickens the learning curve required by a network administrator by providing easy to configure graphical options (such as drop-down menu, etc), and one need not remember the conventional CLI commands. The GUI closely mimics the Cisco Configuration Professional (CCP) providing a simulated environment. It also enables a user to get hands-on experience in using Cisco’s most recent CCP graphical interface.
You may download the product here:
Upcoming: We are now working on code signing our software products to ensure that the software is delivered to the user without being tampered, thus providing 100% virus free, and fully trusted software products.
CertExams.com has recently updated Juniper Network Simulator with Designer (Juniper NetSim) to support several new commands. The newly included command hierarchies include the following:
Edit NAT hierarchy level
Edit firewall hierarchy level and
Edit policy-options hierarchy level
Correspondingly, several new labs have been included to provide hands-on practice with the newly introduced commands. The additional labs include the following:
IPv6 labs
Firewall filter labs
NAT labs
Checkout the new labs at Juniper labs page of Certexams.com
The trial software may be downloaded free from CertExams.com Juniper Junos NetSim product page.
CCNA Network Simulator has been updated to include Graphical User Interface (GUI). Conventionally, a network administrator needs to configure a router or a switch using CLI (Command Line Interface), with the exception of some Wi-Fi routers that allowed GUI configuration. Cisco, as part of its product enhancements, has been working on improving the user interface, and have come up with Cisco Configuration Professional, a GUI tool that allows network administrators to configure and troubleshoot Cisco network devices using a visual GUI interface. Certexams has introduced a limited version of the GUI based Network Configurator that allows users to do mundane tasks such as assigning IP addressses and subnet masks, setting up DHCP, assigning host name, etc. The GUI is intended to provide some hands-on experience of working with CCP (Cisco Configuration Professional) and simulates the CCP navigation.
CCNA NetSim GUI
A typical screenshot of the feature may be seen the figure. As seen in the figure, the GUI consists of a left pane that outlines the configuration tasks, and when selected, the right pane provides the work area, where the user may select or type-in appropriate configuration. Several labs have been given to familiarize the user to configuring the network using GUI. However, this being the first release, more enhancements may be expected to Network Configurator. More configuration tasks, as well as new labs will be added in due course of time.
Other important features of the netsim software are:
The software is completely stand alone, and there is no need for any other software.
Hundreds of lab exercises to get familiarized with concepts of routing, NAT, Access lists, subnet masking, etc.
Configure and troubleshoot VLANs, VTP, and other switch related tasks
There is no hardware required, it s completely software based too.
Please visit the product home page http://routersimulator.certexams.com/ccna-simulator-download/download-network-simulator-designer.html for more information, and free demo download.
MPLS has become very popular during recent years to accommodate gigabit switching speeds over wide area networks. Traditional IP routing uses enormous processing overhead and slows down packet switching speeds. MPLS allows packets to be forwarded by looking at the label (Just like switch looks at Layer 2) rather than having to be passed up to Layer 3 (the IP header). Each packet gets labeled on entry into the service provider’s MPLS network by the ingress router. All the subsequent routing between nodes is based only on the MPLS label that was attached by the previous MPLS enabled router. The router doesn’t have to look at IP header, thus saving enormous processing load. Alter the packet traverses though the MPLS network, the egress router removes the label(s) and forwards the original IP packet toward its final destination.
Network Simulator with Designer for CCNA has been updated to include MPLS commands and several MPLS labs. For complete list of labs included, please visit the page here:
The software consists of hundreds of labs for hands-on practice. The simulator is intended for beginners who desires to have hands-on experience in designing and implementing router/switch network in a simulated environment.
CertExams.com has recently updated its Network Simulator with Designer for CCNA (CCNA NetDSim). The product is useful for students and IT professionals preparing for CCENT/ICND2/CCNA certification.
The updated version includes
1. .NET conversion – The existing VB6 version has been updated to .NET platform, resulting in lessor footprint (smaller file size), and better compatibility with Win 7 and Win 8 OSes.
2. Bug fixes, a few known bugs have been fixed.
CertExams.com recently updated Lab Simulator for Network+ exam. The labsim has been updated to .NET version from the current VB6 version. The update is expected remove a few known bugs, like incompatibility with Adobe 11 software.
Various important features of the software are given below:
Several ready made lab exercises -currently 100+ labs are included with scenario type labs for NAT, Gateware configuration, etc
Workstation, Server, Access Point, Router and Switch (IOS) network simulator.
Configure Wireless Access Point, DHCP Server, and Switches.
Detailed help files that provide step by step instructions on using the simulator have been provided.
The demo version is limited to a fewer labs, and upto global configuration mode is supported in demo version.
Network designer provides drag and drop feature for inserting devices and connectors. GUI based device configuration.
Detailed Lab Manual provided.
Download free demo exam from the product web page:
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.
Cookie
Duration
Description
cookielawinfo-checkbox-analytics
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional
11 months
The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy
11 months
The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.
Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.
Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.
Advertisement cookies are used to provide visitors with relevant ads and marketing campaigns. These cookies track visitors across websites and collect information to provide customized ads.
